{"title":"Sabre Trucks","description":"\u003ca href=\"http:\/\/www.sabretrucks.com\/\" title=\"Sabre Trucks - Longboard Truck Company\"\u003eSabre Trucks \u003c\/a\u003efeature on several of our high-end completes. Our fellow UK-based truck brand is one of the most innovative longboard truck companies out there, using advanced materials and construction methods such as Cold Forging and Gravity Casting to create stronger, lighter and more precisely finished trucks than ever. Check them out at \u003ca href=\"http:\/\/www.sabretrucks.com\/\" target=\"_blank\" title=\"Sabre Trucks - Longboard Truck Company\"\u003ewww.sabretrucks.com.\u003c\/a\u003e","products":[{"product_id":"sabre-standard-truck-180mm","title":"Sabre Trucks Standard 48 Truck 180mm (single truck)","description":"\u003cp\u003eThe New Standard... The Sabre Gravity Cast truck is a benchmark for stiffness, strength and quality in the cast truck world.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.sabretrucks.com\/technology\/gravity-casting\/\"\u003eGravity Cast\u003c\/a\u003e from 356 Aluminium in permanent steel moulds, this is your truck of choice for all around longboarding.\u003c\/p\u003e\n\u003cp\u003eWe use a 48 degree baseplate for a lot of turn for less lean, and a raked hanger for a divey turn.\u003c\/p\u003e\n\u003cp\u003eCast using the finest production methods and materials available, they are a little more expensive than most other cast trucks out there, but you will not find a higher quality fully-cast truck out there.\u003c\/p\u003e\n\u003cp\u003eYou can use these trucks front and rear, or just in the front with a Standard 28 at the back of your board. This creates a \"split angle\" truck setup, which is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier to Pump\u003c\/li\u003e\n\u003cli\u003eCarves with more lean, closer to the feeling of a snowboard or surfboard\u003c\/li\u003e\n\u003cli\u003eMore agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eMore stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf running a 48\/28 split angle setup, we recommend going softer one stop with your bushing durometer.\u003c\/p\u003e\n\u003cp\u003eAssembled with our \u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/carve-bushing-kit\/\"\u003eSabre Carve Bushing Kit.\u003c\/a\u003e Premium formula aftermarket bushings, 16mm tall top and bottom for extra lean. Solid cup washers for maximum rebound.\u003c\/p\u003e\n\u003cp\u003e180mm Hanger width.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e8-hole adjustable 48 Degree baseplate\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e180mm Hanger Width\u003c\/li\u003e\n\u003cli\u003e64mm Axle Height\u003c\/li\u003e\n\u003cli\u003eWeight (180mm): 450g\u003c\/li\u003e\n\u003cli\u003eGravity Cast from high-strength 356 Aluminium in precision steel moulds\u003c\/li\u003e\n\u003cli\u003eHardened 4130 Cro-Mo Steel Axle\u003c\/li\u003e\n\u003cli\u003e4.5mm Axle Rake\u003c\/li\u003e\n\u003cli\u003eLaser-Etched Hanger\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/carve-bushing-kit\/\"\u003eF-Type Carve Bushing Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/pivot-cups\/\"\u003ePrecision Urethane Pivot Cup\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sabre Trucks","offers":[{"title":"Default Title","offer_id":20014648711,"sku":"TRK_SBR_CST_180_48_90A_CB","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/products\/Standard-featured.png?v=1531492144"},{"product_id":"sabre-trucks-tkp-truck-single-truck","title":"Sabre Trucks Street Truck (single truck)","description":"\u003cp\u003eOur second generation Street Truck is perfect for all kinds of skateboards and shorter longboards!\u003c\/p\u003e\n\u003cp\u003eWe took our Gen 1 Street Trucks and made a ton of improvements to the geometry, bushing and washer configuration, pivot cup, baseplate and finish.\u003c\/p\u003e\n\u003cp\u003eThe result is a truck with more turn, more control, easier tuning, better bushing compatability, lighter weight and better grind clearance.\u003c\/p\u003e\n\u003cp\u003eSabre Street Trucks now feature a different pivot cup to our Standard Longboard Trucks, allowing more hanger movement for maximum turn and dive.\u003c\/p\u003e\n\u003cp\u003eThe kingpin length is also shorter to give better grind clearance, and we're using a shorter \u003ca href=\"https:\/\/www.sabretrucks.com\/product-items\/street-cone-bushing\/\"\u003eStreet Cone\u003c\/a\u003e top bushing (10.5mm) with a custom-fit cup washer. This helps prevent wheelbite and gives you lots of hanger to grind on without worrying about kingpin snags.\u003c\/p\u003e\n\u003cp\u003eThe bottom bushing is the same height as our \u003ca href=\"https:\/\/www.sabretrucks.com\/product-items\/standard-truck\/\"\u003eStandard Longboard Trucks\u003c\/a\u003e at 16mm, giving you access to our entire bushing lineup for the bushing that does the bulk of the work. Most street trucks on the market use a 14 or 15mm bottom bushing - our choice of a full-sized 16mm bushing gives more turn and lean in comparison. We ship these trucks with \u003ca href=\"https:\/\/www.sabretrucks.com\/product-items\/barrel-bushing\/\"\u003eBarrel bushings\u003c\/a\u003e, but you could switch to a \u003ca href=\"https:\/\/www.sabretrucks.com\/product-items\/cone-bushing\/\"\u003eCone\u003c\/a\u003e for more dive and turn if you need it.\u003c\/p\u003e\n\u003cp\u003eThe baseplate is lighter and a shorter, more compact shape to help with grinds, drilled old-school and new school. It'll fit regular shockpads or angled risers no problem.\u003c\/p\u003e\n\u003cp\u003ePerfect for your street setup, cruiser or shorter longboard, available in four different widths whatever you're running.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePrice for one truck.\u003c\/span\u003e\u003c\/p\u003e","brand":"Sabre Trucks","offers":[{"title":"180","offer_id":20014737927,"sku":"TRK_SBR_STR_180_BLK","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"170","offer_id":20014738119,"sku":"TRK_SBR_STR_170_BLK","price":26.0,"currency_code":"GBP","in_stock":true},{"title":"153","offer_id":20014738247,"sku":"TRK_SBR_STR_153_BLK","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"127","offer_id":20014738375,"sku":"TRK_SBR_STR_127_BLK","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/products\/Sabre_Street_Truck_170.png?v=1601559956"},{"product_id":"forged-precision-freeride-truck","title":"Sabre Trucks Forged Precision Mk3 48","description":"Our third generation of high-performance forged truck is here!\u003cbr\u003e\u003cbr\u003eWith narrower widths, stiffer ride and higher level of precision than the MK1 and MK2, the Sabre Forged Precision MK3 builds on the lessons learned in over a decade of making and skating forged trucks.\u003cbr\u003e\u003cbr\u003eAt the heart of the MK3 is our cold forged aircraft-grade 6061-T6 hanger. Engineered for maximum stiffness at minimal weight and manufactured using a true cold-forging method, much less wasteful than CNC machining.\u003cbr\u003e\u003cbr\u003eNew for the MK3 are the axle studs. We are now CNC lathing and grinding these axles from EN-24T steel to a tolerance of +\/- 3 micron, which allows an extremely close fit to your bearings to minimise play. A chemical blacking process provides a small degree of rust prevention whilst retaining tolerance.\u003cbr\u003e\u003cbr\u003eThe axle studs are screwed and threadlocked using a high-strength formula. This ensures dead-straight axles for longer wheel life and better grip than cast hangers, which will always be slightly bent due to the cooling phase of the casting process.\u003cbr\u003e\u003cbr\u003eThe bushing seat has been tightened up slightly compared to the MK2, perfectly fitting our famous hand-poured bushings whilst allowing them to move as freely as possible with minimal hanger slop.\u003cbr\u003e\u003cbr\u003eThe hanger pivot is CNC'd to ensure perfect cylindricity, mating with our custom urethane pivot cup to provide the smoothest turn you'll find anywhere.\u003cbr\u003e\u003cbr\u003eWith 3mm of rake, the hangers can be flipped for a lower centre of gravity.\u003cbr\u003e\u003cbr\u003eThe 48 degree baseplate creates a high degree of turn, and the 8-hold drilling allows fitment to oldschool and newschool drilled decks, with 6mm of wheelbase adjustment on oldschool drill patterns.\u003cbr\u003e\u003cbr\u003eAssembled with our Sabre Carve Bushing Kit. Premium formula aftermarket bushings, 16mm tall top and bottom for extra lean. Solid cup washers for maximum rebound.\u003cbr\u003e\u003cbr\u003eAvailable in 180mm and 150mm widths to suit a wide variety of deck and wheel dimensions.","brand":"Sabre Trucks","offers":[{"title":"150","offer_id":7308310446140,"sku":"TRK_SBR_FGD_150_48_93A_CB","price":90.0,"currency_code":"GBP","in_stock":true},{"title":"180","offer_id":7308310478908,"sku":"TRK_SBR_FGD_180_48_93A_CB","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/products\/Sabre-Forged-Mk3_Truck-f.jpg?v=1645459366"},{"product_id":"sabre-trucks-standard-28-truck-180mm-single-truck","title":"Sabre Trucks Standard 28 Truck 180mm (single truck)","description":"\u003cp\u003eThe Sabre Standard 28 is a slack angle version of the proven \u003ca href=\"https:\/\/sabretrucks.com\/product-items\/standard-truck\/\"\u003eSabre Standard 48 truck.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSharing the same \u003ca href=\"http:\/\/www.sabretrucks.com\/technology\/gravity-casting\/\"\u003egravity casting techniques\u003c\/a\u003e as its steeper cousin, the 28 degree version is perfect as a rear truck when used in tandem with a Standard 48 on the front. The 28 and the 48 share the same axle height, allowing for a 48\/28 \"split angle\" that will transform any longboard, whatever your ability and confidence:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier to Pump\u003c\/li\u003e\n\u003cli\u003eCarves with more lean, closer to the feeling of a snowboard or surfboard\u003c\/li\u003e\n\u003cli\u003eMore agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eMore stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe use a 28 degree baseplate for increased lean, allowing the rear truck to keep up with the turn on the front truck.\u003c\/p\u003e\n\u003cp\u003eCast using the finest production methods and materials available, they are a little more expensive than most other cast trucks out there, but you will not find a higher quality fully-cast truck.\u003c\/p\u003e\n\u003cp\u003eAssembled with our \u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/carve-bushing-kit\/\"\u003eSabre Carve Bushing Kit.\u003c\/a\u003e Premium formula aftermarket bushings, 16mm tall top and bottom for extra lean. We use a slightly harder bushing set on the 28 to prevent wheelbite. Solid cup washers for maximum rebound.\u003c\/p\u003e\n\u003cp\u003e180mm Hanger width.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8-hole adjustable 48 Degree baseplate\u003c\/li\u003e\n\u003cli\u003e180mm Hanger Width\u003c\/li\u003e\n\u003cli\u003e64mm Axle Height\u003c\/li\u003e\n\u003cli\u003eWeight (180mm): 525g\u003c\/li\u003e\n\u003cli\u003eGravity Cast from high-strength 356 Aluminium in precision steel moulds\u003c\/li\u003e\n\u003cli\u003eHardened 4130 Cro-Mo Steel Axle\u003c\/li\u003e\n\u003cli\u003e4.5mm Axle Rake\u003c\/li\u003e\n\u003cli\u003eLaser-Etched Hanger\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/carve-bushing-kit\/\"\u003eR-Type Carve Bushing Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sabretrucks.com\/product-items\/pivot-cups\/\"\u003ePrecision Urethane Pivot Cup\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sabre Trucks","offers":[{"title":"Default Title","offer_id":56542721278336,"sku":"TRK_SBR_CST_180_28_93A_CB","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/Sabre-Trucks-Standard_28_front-feat.png?v=1757605343"},{"product_id":"sabre-trucks-forged-precision-mk3-28","title":"Sabre Trucks Forged Precision Mk3 28","description":"\u003cp\u003eOur third generation of high-performance forged truck is here - now with a slacker geometry 28 degree option.\u003c\/p\u003e\n\u003cp\u003eSharing the same Forged 6061-T6 Hanger and Precision Ground Axle studs as the original 48 degree version, the Forged Precision 28 is perfect as a rear truck.\u003c\/p\u003e\n\u003cp\u003eBy using two trucks with radically different geometries at ether end of a longboard, you can create a \"split angle\" setup that brings many advantages that skaters of all abilities will enjoy:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier to Pump\u003c\/li\u003e\n\u003cli\u003eCarves with more lean, closer to the feeling of a snowboard or surfboard\u003c\/li\u003e\n\u003cli\u003eMore agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eMore stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe use a 28 degree baseplate for increased lean, allowing the rear truck to keep up with the turn on the front truck.\u003c\/p\u003e\n\u003cp\u003eBy building your Split Angle setup using Forged rather than the Standard Cast hanger, you can combine the benefits above with all the advantages that our Forged Precision system brings to the table:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNarrower Hanger Widths are easier to pump and more responsive\u003c\/li\u003e\n\u003cli\u003eStiffer and lighter forged hanger\u003c\/li\u003e\n\u003cli\u003ePrecision ground steel EN-24T axle studs - stronger than stainless, ground to +\/-3 micron for a perfect bearing fit, chemically blacked to prevent corrosion\u003c\/li\u003e\n\u003cli\u003eMore open bushing seat compared to the Standard Cast truck, gives more lean and response. You can really feel this on a Split Angle setup!\u003c\/li\u003e\n\u003cli\u003ePerfectly cylindrical hanger pivot, machinend post-forging for a super smooth turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 28 degree baseplate creates a high degree of lean compared to the original 48, and the 8-hold drilling allows fitment to oldschool and newschool drilled decks, with 6mm of wheelbase adjustment on oldschool drill patterns.\u003c\/p\u003e\n\u003cp\u003eAssembled with our Sabre Carve Bushing Kit. Premium formula aftermarket bushings, 16mm tall top and bottom for extra lean. Solid cup washers for maximum rebound.\u003c\/p\u003e\n\u003cp\u003eAvailable in 180mm and 150mm widths to suit a wide variety of deck and wheel dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/sabretrucks.com\/wp-content\/uploads\/2022\/02\/Sabre-Mk3-Care.pdf\"\u003eDownload maintenance manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Sabre Trucks","offers":[{"title":"150","offer_id":56784777249152,"sku":"TRK_SBR_FGD_150_28_96A_CB","price":90.0,"currency_code":"GBP","in_stock":false},{"title":"180","offer_id":56784777281920,"sku":"TRK_SBR_FGD_180_28_96A_CB","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/sabre-forged-mk3-28.png?v=1761735036"},{"product_id":"sabre_trucks_standard_split_angle_truckset","title":"Sabre Trucks Standard 48\/28 Split Set","description":"\u003cp\u003eEverything you need to transform your longboard into a Split Angle setup!\u003c\/p\u003e\n\u003cp\u003eThis truckset contains a pair of our super-solid and proven Standard Gravity Cast Longboard Trucks - set up as front and rear specific trucks.\u003c\/p\u003e\n\u003cp\u003ePut the turnier 48 degree (Softer orange bushings) in the front to make your board more agile.\u003c\/p\u003e\n\u003cp\u003eThe super-stable 28 degree (Harder grey bushings) goes in the back to give more stability at high speeds, a better platform for pumping, and a more carvy, leaning ride.\u003c\/p\u003e\n\u003cp\u003eBecause a split angle setup will make your board turn more and lean more, we've included a set of our own 6mm risers and some longer bolts to help avoid wheelbite. It's likely - though not a given - that you'll need these to get your board riding with your existing wheels.\u003c\/p\u003e\n\u003cp\u003eWe've even thrown in an extra set of green bushings, so you can dial in your back truck for a bit more turn if you like.\u003c\/p\u003e\n\u003cp\u003eSplit Angle setups work great on any longboard. By mounting this truckset on your board, you will make it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier to Pump - travel without pushing!\u003c\/li\u003e\n\u003cli\u003eCarve with more lean, closer to the feeling of a snowboard or a surfboard\u003c\/li\u003e\n\u003cli\u003eMore agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eMore stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe believe that every skater, whatever their ability, will benefit from a split angle setup. We've put this truck set together to make it as easy as possible for you to make your board skate better than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll the benefits of our Standard Gravity Cast Trucks - Super-tough 356 aluminium, hardened steel axle, proven geometry\u003c\/li\u003e\n\u003cli\u003eFront and rear specific truck set for directional longboard setups\u003c\/li\u003e\n\u003cli\u003eFront truck: 48 degrees, 86A Cone\/Cone for maximum agility\u003c\/li\u003e\n\u003cli\u003eRear truck: 28 degrees, 93A Cone\/Barrel for more stability and confidence\u003c\/li\u003e\n\u003cli\u003e6mm Risers and 1.5\" bolts to help prevent wheelbite\u003c\/li\u003e\n\u003cli\u003eExtra set of 96A bushings and washers to experiment with rear truck setups\u003c\/li\u003e\n\u003cli\u003e180mm width\u003c\/li\u003e\n\u003cli\u003eIndividually assembled in the UK to our exacting standards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sabre Trucks","offers":[{"title":"Default Title","offer_id":56800550551936,"sku":"SET_CST180_SPLIT","price":65.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/Sabre-Split-Angle-Cast-180-kit-5.jpg?v=1762783576"},{"product_id":"sabre_trucks_forged_split_angle_truckset","title":"Sabre Trucks Forged 48\/28 Split Set","description":"\u003cp\u003eEverything you need to transform your longboard into a Split Angle setup!\u003c\/p\u003e\n\u003cp\u003eThis truckset contains a pair of the finest longboard trucks out there - our very own Forged Precision Mk3 trucks - set up as front and rear specific trucks.\u003c\/p\u003e\n\u003cp\u003ePut the turnier 48 degree (Softer orange bushings) in the front to make your board more agile.\u003c\/p\u003e\n\u003cp\u003eThe super-stable 28 degree (Harder grey bushings) goes in the back to give more stability at high speeds, a better platform for pumping, and a more carvy, leaning ride.\u003c\/p\u003e\n\u003cp\u003eBecause a split angle setup will make your board turn more and lean more, we've included a set of our own 6mm risers and some longer bolts to help avoid wheelbite. It's likely - though not a given - that you'll need these to get your board riding with your existing wheels.\u003c\/p\u003e\n\u003cp\u003eWe've even thrown in an extra set of green bushings, so you can dial in your back truck for a bit more turn if you like.\u003c\/p\u003e\n\u003cp\u003eThe Forged Precision Split Angle Truckset is available in two widths, to suit any longboard - 180mm and 150mm.\u003c\/p\u003e\n\u003cp\u003eSplit Angle setups work great on any longboard. By mounting this truckset on your board, you will make it:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasier to Pump - travel without pushing!\u003c\/li\u003e\n\u003cli\u003eCarve with more lean, closer to the feeling of a snowboard or a surfboard\u003c\/li\u003e\n\u003cli\u003eMore agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eMore stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe believe that every skater, whatever their ability, will benefit from a split angle setup. We've put this truck set together to make it as easy as possible for you to make your board skate better than ever.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll the benefits of our Forged Precision Trucks - stiffer, stronger, more precise, less play and more lean\u003c\/li\u003e\n\u003cli\u003eFront and rear specific truck set for directional longboard setups\u003c\/li\u003e\n\u003cli\u003eFront truck: 48 degrees, 86A Cone\/Cone for maximum agility\u003c\/li\u003e\n\u003cli\u003eRear truck: 28 degrees, 96A Cone\/Barrel for more stability and confidence\u003c\/li\u003e\n\u003cli\u003e6mm Risers and 1.5\" bolts to help prevent wheelbite\u003c\/li\u003e\n\u003cli\u003eExtra set of 93A bushings and washers to experiment with rear truck setups\u003c\/li\u003e\n\u003cli\u003e180mm and 150mm widths\u003c\/li\u003e\n\u003cli\u003eIndividually assembled in the UK to our exacting standards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sabre Trucks","offers":[{"title":"150","offer_id":56852904345984,"sku":"SET_FGD150_SPLIT","price":195.0,"currency_code":"GBP","in_stock":false},{"title":"180","offer_id":56852904378752,"sku":"SET_FGD180_SPLIT","price":195.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/Sabre-Split-Angle-Forged-180-kit-5.jpg?v=1762174346"},{"product_id":"sabre-trucks-upgrade-kit-split-angles","title":"Sabre Trucks Upgrade Kit - Split Angles","description":"\u003cp\u003e\u003cstrong\u003eThe Sabre Trucks Upgrade Kit - Split Angles is designed for anyone who already owns a set of Sabre Standard (or Forged) 48° trucks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you own a Lush board bought since 2009, this is a great way to bring your setup bang up to date!\u003c\/p\u003e\n\u003cp\u003eIf you don't own those, you'll want one of these whole trucksets rather than just this upgrade kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre_trucks_standard_split_angle_truckset\" title=\"Sabre Trucks Standard 180mm Split Angle Truckset\"\u003eStandard 180mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Sabre Trucks Forged Precision 150mm Split Angle Truckset\" href=\"https:\/\/vandemlongboardshop.co.uk\/products\/sabre-trucks-forged-precision-mk3-150mm-48-28-split-angle-truckset\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre_trucks_forged_split_angle_truckset?variant=56852904345984\" title=\"Sabre Trucks Forged Precision 150mm Split Angle Truckset\"\u003eForged Precision 150mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre_trucks_forged_split_angle_truckset?variant=56852904378752\" title=\"Sabre Trucks Forged Precision Mk3 180mm 48°\/28° Split Angle Truckset\"\u003eForged Precision 180mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis package will absolutely revolutionise your longboard\u003c\/strong\u003e, and we wanted to take care of existing Lush riders first and foremost by offering everything in a comprehensive bundle at amazing value. This is not a subscription service - this is everything you could need, provided you already have a set of Sabre 48° trucks on your board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003ca title=\"Sabre Trucks 28 degree baseplate\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-cast-28-baseplate-single-baseplate\"\u003eSabre Trucks 28° Baseplate\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e86A \u003ca title=\"Sabre Cone Bushings\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-supercarve-bushing-kit?variant=6840593350716\"\u003eSabre Cone\/Cone Bushings\u003c\/a\u003e and cupped washers for your existing front (48°) truck\u003c\/li\u003e\n\u003cli\u003e93A \u003ca title=\"Sabre Cone and Barrel Bushings\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-carve-bushing-kit?variant=6840654626876\"\u003eSabre Cone\/Barrel bushings\u003c\/a\u003e and cupped washers for cast back trucks\u003c\/li\u003e\n\u003cli\u003e96A Sabre Cone\/Barrel bushings and cupped washers for forged back trucks\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Skateboard Risers\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-standard-riser\"\u003eSabre Standard Risers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Skateboard bolts\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-boltset?variant=20014602439\"\u003e1.5\" Domehead boltset\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e1x free \u003ca title=\"Sabre Bearing Lube\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-bearing-lube-30ml\"\u003eSabre Bearing Lube\u003c\/a\u003e - just in case it's been a while :) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBut why would you want to make a split angle setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn short, unless you ride fakie (backwards) a lot, there are no downsides.\u003c\/p\u003e\n\u003cp\u003eNo matter your experience level, a split angle board will:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBe easier to Pump - travel without pushing!\u003c\/li\u003e\n\u003cli\u003eCarve with more lean, closer to the feeling of a snowboard or a surfboard\u003c\/li\u003e\n\u003cli\u003eBe more agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eBe more stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspired by slalom skateboarders who unlocked these secrets decades ago, Sabre has now brought all the advantages to your every day longboard.\u003c\/p\u003e\n\u003cp\u003eWhether you're cruising round town, carving the sea front or getting critical down hills, you will find your board more responsive, more fun, yet more settled.\u003c\/p\u003e\n\u003cp\u003eUnlock the lines you've been dreaming about with a set of Sabre 48\/28 split angles trucks.\u003c\/p\u003e","brand":"Sabre Trucks","offers":[{"title":"Default Title","offer_id":56800570933632,"sku":"SET_UPGRADE_CST_180","price":40.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/Sabre-split-angle-upgrade-kit-3.jpg?v=1762174819"},{"product_id":"sabre-trucks-forged-split-upgrade","title":"Sabre Trucks Precision Upgrade Kit - Forged Precision Split Angles","description":"\u003cp\u003e\u003cstrong\u003eThe Sabre Trucks Precision Upgrade Kit - Split Angles is designed for anyone who already owns a set of Sabre Standard 48° trucks and wants to supercharge them with forged hangers as well as split angles!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you own a Lush board bought since 2009, this is a great way to bring your setup bang up to date!\u003c\/p\u003e\n\u003cp\u003eIf you don't own those, you'll want one of these whole trucksets rather than just this upgrade kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Sabre Trucks Forged Precision 150mm Split Angle Truckset\" href=\"https:\/\/vandemlongboardshop.co.uk\/products\/sabre-trucks-forged-precision-mk3-150mm-48-28-split-angle-truckset\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre_trucks_forged_split_angle_truckset?variant=56852904345984\" title=\"Sabre Trucks Forged Precision 150mm Split Angle Truckset\"\u003eForged Precision 150mm\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre_trucks_forged_split_angle_truckset?variant=56852904378752\" title=\"Sabre Trucks Forged Precision Mk3 180mm 48°\/28° Split Angle Truckset\"\u003eForged Precision 180mm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis package will absolutely revolutionise your longboard\u003c\/strong\u003e, and we wanted to take care of existing Lush riders first and foremost by offering everything in a comprehensive bundle at amazing value. This is not a subscription service - this is everything you could need, provided you already have a set of Sabre 48° trucks on your board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x \u003ca href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-mk2-forged-precision-hanger-single\" title=\"Sabre Trucks Forged Precision Mk3 Hangers\"\u003eSabre Mk3 Forged Precision Hangers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x \u003ca title=\"Sabre Trucks 28 degree baseplate\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-cast-28-baseplate-single-baseplate\"\u003eSabre Trucks 28° Baseplate\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e86A \u003ca title=\"Sabre Cone Bushings\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-supercarve-bushing-kit?variant=6840593350716\"\u003eSabre Cone\/Cone Bushings\u003c\/a\u003e and cupped washers for your existing front (48°) truck\u003c\/li\u003e\n\u003cli\u003e96A Sabre Cone\/Barrel bushings and cupped washers for forged back trucks\u003c\/li\u003e\n\u003cli\u003e93A \u003ca title=\"Sabre Cone and Barrel Bushings\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-carve-bushing-kit?variant=6840654626876\"\u003eSabre Cone\/Barrel bushings\u003c\/a\u003e and cupped washers for a softer back truck\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Skateboard Risers\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-trucks-standard-riser\"\u003eSabre Standard Risers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Skateboard bolts\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-boltset?variant=20014602439\"\u003e1.5\" Domehead boltset\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e1x free \u003ca title=\"Sabre Bearing Lube\" href=\"https:\/\/shop.lushlongboards.com\/collections\/sabre\/products\/sabre-bearing-lube-30ml\"\u003eSabre Bearing Lube\u003c\/a\u003e - just in case it's been a while :) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBut why would you want to make a split angle setup?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn short, unless you ride fakie (backwards) a lot, there are no downsides.\u003c\/p\u003e\n\u003cp\u003eNo matter your experience level, a split angle board will:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBe easier to Pump - travel without pushing!\u003c\/li\u003e\n\u003cli\u003eCarve with more lean, closer to the feeling of a snowboard or a surfboard\u003c\/li\u003e\n\u003cli\u003eBe more agile at slow speeds\u003c\/li\u003e\n\u003cli\u003eBe more stable at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInspired by slalom skateboarders who unlocked these secrets decades ago, Sabre has now brought all the advantages to your every day longboard.\u003c\/p\u003e\n\u003cp\u003eWhether you're cruising round town, carving the sea front or getting critical down hills, you will find your board more responsive, more fun, yet more settled.\u003c\/p\u003e\n\u003cp\u003eUnlock the lines you've been dreaming about with a set of Sabre 48\/28 split angle Forged Precision trucks.\u003c\/p\u003e","brand":"Sabre Trucks","offers":[{"title":"150","offer_id":56811276206464,"sku":"SET_UPGRADE_FGD_150","price":170.0,"currency_code":"GBP","in_stock":false},{"title":"180","offer_id":56811276239232,"sku":"SET_UPGRADE_FGD_180","price":170.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/files\/Sabre_forged_180_upgrade_kit-4.jpg?v=1762175196"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1081\/4816\/collections\/cat_trucks.png?v=1554375458","url":"https:\/\/shop.lushlongboards.com\/en-euddu\/collections\/trucks.oembed","provider":"Lush Longboards UK Online Shop","version":"1.0","type":"link"}